PSdZData Full 4.60.42 – Complete BMW Programming Data for ISTA+ & E-Sys | 2026

PSdZData Full 4.60.42 is an updated BMW programming data package (as of 2026) for ISTA+ and E-Sys. It contains the complete vehicle data required for supported ECU coding, module flashing, software updates, and programming work on modern BMW electronic platforms.

This is the full PSdZData package, not the restricted Lite version. It is aimed at workshops, BMW coding specialists, retrofit technicians, and advanced users who require complete programming files for BMW F-series, G-series, I-series, and other supported platforms.

PSdZData Full 4.60.42 for BMW ISTA and E-Sys

PSdZData Full 4.60.42 provides the software data that compatible BMW diagnostic and engineering applications need to identify control units, calculate programming operations, and access ECU firmware files.

The package can be used with supported versions of BMW ISTA+ and E-Sys – for coding preparation, ECU programming, module flashing, vehicle software updates, and retrofit-related work.

Main Applications

• BMW ECU programming data
• E-Sys coding & flashing support
• ISTA+ programming data
• ECU firmware updates
• Preparation for module replacement
• BMW retrofit programming
• Vehicle software data integration
• ECU identification and configuration data
• Programming support for F-series
• Programming support for G-series
• Programming support for I-series
• ENET- and ICOM-based workflows

Actual compatibility depends on vehicle chassis, integration level, installed ECU hardware, selected software version, and diagnostic interface.

Full Version vs. Lite Version

PSdZData Lite is usually sufficient for basic coding tasks that do not require full ECU firmware files.

PSdZData Full 4.60.42 contains the complete programming and flash data needed for more demanding operations – including supported ECU firmware updates and module programming.

Choose the Full version if you need:

• ECU flashing
• Module programming
• Vehicle software updates
• Complete programming data
• Advanced retrofit work
• Complete ISTA or E-Sys programming workflows

Compatible Software

PSdZData Full 4.60.42 is intended for use with compatible versions of the following software:

• BMW ISTA+
• BMW E-Sys
• Supported BMW coding environments
• Supported BMW programming environments

Note: ISTA+, E-Sys, and other diagnostic applications are not included unless explicitly stated in your order.

Compatible Interfaces

Depending on the vehicle and operation, the following interfaces are commonly used:

• ENET cable for BMW F-series and G-series coding
• BMW ICOM A2
• BMW ICOM Next
• Compatible professional BMW programming interfaces

ENET is often used for coding and selected programming workflows. BMW ICOM is recommended for professional diagnostic and programming operations where stable vehicle communication is crucial.

Diagnostic cables and hardware interfaces are not included.

System Requirements

• Windows 10 or Windows 11
• 64-bit operating system recommended
• High-capacity SSD highly recommended
• At least 350 GB of free space recommended for extraction and installation
• Additional free space may be required during archive extraction
• 7-Zip or WinRAR required
• Administrator privileges may be required
• Stable internet connection required for download
• Compatible ISTA+ or E-Sys installation required

Actual storage requirements may vary depending on extraction method, installation location, and existing BMW data files.

Scope of Delivery

• PSdZData Full 4.60.42 package
• Complete BMW coding and programming data
• Archive extraction guide
• Basic installation guide
• Secure digital download access

This is a purely digital product. No physical item, USB stick, DVD, diagnostic cable, or interface will be shipped.

After purchase, download information will be sent to you via your order page and by email. We recommend downloading the package as soon as possible and backing it up on your own storage device.

Important Notes

• This product contains programming data only
• ISTA+ software is not included
• E-Sys software is not included
• Diagnostic hardware is not included
• The Full package is intended for advanced users
• Programming and flashing require technical expertise
• Incorrect programming can damage or disable control units
• Always use a stable vehicle power supply during programming
• Check vehicle compatibility before starting an ECU update
• We do not offer vehicle coding, retrofitting, or cable configuration services
• Back up existing coding data before making changes

Revocation / Returns

Returns are excluded as this is a digital service (§ 312g Abs. 2 Nr. 1 BGB). By purchasing, you expressly agree to waive your right of withdrawal. Please only purchase if you agree to these terms.

We assume no liability for damages due to improper installation or incorrect application of the software or hardware. Everyone acts at their own risk!

Disclaimer:

BMW, MINI, Rolls-Royce, E-Sys, ISTA, ISTA+, PSdZData, ICOM and related names, marks and designs are trademarks and/or registered trademarks of their respective owners in the United States and other countries. Bimmerpro, this website and its content are not affiliated with, endorsed by, or sponsored by Bayerische Motoren Werke AG, MINI, Rolls-Royce Motor Cars Limited, or their partners or affiliates.

All products offered on this website are aftermarket digital products and are not manufactured by Bayerische Motoren Werke AG, MINI, Rolls-Royce Motor Cars Limited, or their partners or affiliates. All other companies, products, or names mentioned on this website are for identification and compatibility purposes only and may be trademarks of their respective owners.

It is neither suggested, express nor implied, that any product sold by Bimmerpro is authorized by or in any way connected with Bayerische Motoren Werke AG, MINI, Rolls-Royce Motor Cars Limited, or the aforementioned companies.