PSdZData Full 4.60.42 – Complete BMW Programming Data for ISTA+ & E-Sys | 2026

PSdZData Full 4.60.42 is an updated BMW programming data package (as of 2026) for ISTA+ and E-Sys. It contains the complete vehicle data required for supported control unit coding, module flashing, software updates, and programming tasks on modern BMW electronic platforms.

This is the full PSdZData package (Full), not the restricted Lite version. It is aimed at workshops, BMW coding specialists, retrofit technicians, and advanced users who require complete programming files for the BMW F-Series, G-Series, I-Series, and other supported platforms.

PSdZData Full 4.60.42 for BMW ISTA and E-Sys

PSdZData Full 4.60.42 provides the software data that compatible BMW diagnostic and engineering applications require for identifying control units, calculating programming procedures, and accessing ECU firmware files.

The package can be used with supported versions of BMW ISTA+ and E-Sys – for coding preparation, control unit programming, module flashing, vehicle software updates, and retrofit-related tasks.

Main Applications

• BMW ECU programming data
• E-Sys coding & flashing support
• ISTA+ programming data
• Control unit firmware updates
• Preparation for module replacement
• BMW retrofit programming
• Integration of vehicle software data
• ECU identification and configuration data
• Programming support for F-Series
• Programming support for G-Series
• Programming support for I-Series
• ENET- and ICOM-based workflows

Actual compatibility depends on the vehicle chassis, integration level, installed control unit hardware, selected software version, and diagnostic interface.

Full Version vs. Lite Version

PSdZData Lite is usually sufficient for basic coding tasks that do not require full ECU firmware files.

PSdZData Full 4.60.42 contains the complete programming and flash data required for more demanding operations – including supported ECU firmware updates and module programming.

Choose the Full version if you need the following:

• ECU flashing
• Module programming
• Vehicle software updates
• Complete programming data
• Advanced retrofit tasks
• Complete ISTA or E-Sys programming workflows

Compatible Software

PSdZData Full 4.60.42 is intended for use with compatible versions of the following software:

• BMW ISTA+
• BMW E-Sys
• Supported BMW coding environments
• Supported BMW programming environments

Note: ISTA+, E-Sys, and other diagnostic applications are not included unless explicitly stated in your order.

Compatible Interfaces

Depending on the vehicle and procedure, the following interfaces are typically used:

• ENET cable for BMW F-Series and G-Series coding
• BMW ICOM A2
• BMW ICOM Next
• Compatible professional BMW programming interfaces

ENET is frequently used for coding and select programming workflows. BMW ICOM is recommended for professional diagnostic and programming operations where stable vehicle communication is crucial.

Diagnostic cables and hardware interfaces are not included.

System Requirements

• Windows 10 or Windows 11
• 64-bit operating system recommended
• SSD with high capacity strongly recommended
• At least 350 GB of free storage space recommended for extraction and installation
• Additional free storage space may be required during archive extraction
• 7-Zip or WinRAR required
• Administrator rights may be required
• Stable internet connection required for download
• Compatible ISTA+ or E-Sys installation required

Actual storage requirements may vary depending on the extraction method, installation location, and existing BMW data files.

Scope of Delivery

• PSdZData Full 4.60.42 package
• Complete BMW coding and programming data
• Instructions for archive extraction
• Basic installation guide
• Secure digital download access

This is a purely digital product. No physical item, USB stick, DVD, diagnostic cable, or interface will be shipped.

After purchase, the download information will be provided via your order page and via email. We recommend downloading the package as soon as possible and backing it up on your own storage device.

Important Notes

• This product contains programming data exclusively
• ISTA+ software is not included
• E-Sys software is not included
• Diagnostic hardware is not included
• The Full package is aimed at advanced users
• Programming and flashing require technical expertise
• Incorrect programming can damage or disable control units
• Always use a stable vehicle power supply during programming
• Check vehicle compatibility before starting an ECU update
• We do not offer vehicle coding, retrofitting, or cable configuration services
• Back up existing coding data before making changes

Cancellation / Returns

Returns are excluded as this is a digital service (§ 312g para. 2 no. 1 BGB). By purchasing, you expressly agree to waive your right of withdrawal. Please only purchase if you agree to these terms.

We assume no liability for damages resulting from improper installation or incorrect application of the software or hardware. Everyone acts at their own risk!

Disclaimer:

BMW and MINI are trademarks of Bayerische Motoren Werke AG. All other trademarks, product names, and company names mentioned on this website are the property of their respective owners.

BimmerPro is an independent provider and is not affiliated with, authorized, sponsored, or endorsed by Bayerische Motoren Werke AG or any other trademark owner referenced on this website.

Third-party trademarks and product names are used solely for identification, description, and compatibility purposes. Their use does not imply any affiliation, authorization, sponsorship, or endorsement.